|Year : 2017 | Volume
| Issue : 3 | Page : 122-125
Deformed and fractured instruments in the removal of root canal filling material using different techniques, in vitro
Bushra Faiz Alhawsawi1, Mohammed Alomari2, Saud Orfali3
1 Endodontic Lecturer, Riyadh Colleges of Dentistry and Pharmacy, Riyadh, Saudi Arabia
2 Professor, Chairman of Restorative Department, Riyadh Colleges of Dentistry and Pharmacy, Riyadh, Saudi Arabia
3 Endodontic Consultant, General Director of Dental Services, Ministry of Health, Dental Department, Riyadh, Saudi Arabia
|Date of Web Publication||27-Jun-2017|
Bushra Faiz Alhawsawi
Endodontic Lecturer, Riyadh Colleges of Dentistry and Pharmacy, Riyadh
Source of Support: None, Conflict of Interest: None
Aims and Objectives: The aims and objectives of the study were to evaluate deformed and fractured instruments in removing gutta-percha (GP) from the root canal using various techniques. Materials and Methods: Root canals of sixty extracted human permanent premolar teeth were prepared and filled with laterally condensed GP and AH26 sealer, and the specimens were incubated for 2 weeks. Then, roots were divided randomly into five groups (12 roots of each group). The root fillings were removed with Gates-Glidden, D-Race instruments, ProTaper Universal Retreatment instruments (alone or with Hedstrom files). Fractured or deformed instruments were noted. The data were analyzed with one-way analysis of variance and Tukey's post hoc test to demonstrate difference between groups. Results: Overall, 35 instruments were fractured or deformed in the study, of them 29 Hedstrom files were deformed. Conclusion: Within the limitations of this study, it can be concluded that all GP removal techniques did not clean the canals completely, but deformity and fracture instruments were more. Maximum Hedstrom files were deformed.
Keywords: Fractured instruments, gutta-percha removal, Hedstrom files
|How to cite this article:|
Alhawsawi BF, Alomari M, Orfali S. Deformed and fractured instruments in the removal of root canal filling material using different techniques, in vitro. J Int Oral Health 2017;9:122-5
|How to cite this URL:|
Alhawsawi BF, Alomari M, Orfali S. Deformed and fractured instruments in the removal of root canal filling material using different techniques, in vitro. J Int Oral Health [serial online] 2017 [cited 2019 Aug 24];9:122-5. Available from: http://www.jioh.org/text.asp?2017/9/3/122/209051
| Introduction|| |
Long-term success of endodontic therapy relies on thorough debridement of the root canal system followed by three-dimensional obturation. Inability to achieve these goals results in persistence of intracanal pathogens, eventually leading to treatment failure. The main goal of nonsurgical root canal retreatment is to enhance healing by reestablishing healthy periapical tissues to reobturate the canals after complete removal of the old filling material.,
Therefore, old root canal filling material should be removed from canal system to regain access to microorganisms and pulp tissue remnants that might be responsible for periapical inflammation and thus posttreatment disease. Safe and efficient removal of filling material from canal systems is essential for optimal root canal retreatment. Ideally, all filling material and sealer should be removed from the canal space.
The commonly used root canal filling material is gutta-percha (GP). There are different techniques and methods to remove the GP from root canal system. One of the most common removal techniques is using Hedstrom files alone or in combination with Gates-Glidden drills with or without solvents. The use of combination between hand and rotary files or solvent was found to be effective in removing the filling material from canals.
Furthermore, other techniques proposed to remove the GP and root canal materials included solvent, heated instruments, ultrasonic instruments, and lasers. Recently, various nickel titanium rotary instruments have been developed to facilitate removal of root canal materials.
Endodontic failures proposed can include apical percolation, root perforation, unfilled canals, coexisting periodontal lesion, incomplete obturation, under- and over-extension of filling materials, and coronal leakage.
Nevertheless, some cases retreated on technical indication revealed that the potential for pathologic processes to develop indication was low (6%). Thus, a relationship showed the analysis material often accompanied by over-instrumentation and overfilling. Usually, the bacteria found outside the apical foramen and did not respond to nonsurgical strategies and must be treated by means of periradicular surgery.
Therefore, the aim of this study was to evaluate deformed and fractured instruments to remove root canal filling material (GP) using various methods and techniques including rotary Re-endo systems ProTaper Universal retreatment and D-Race used.
| Materials and Methods|| |
Freshly extracted permanent human premolar teeth were collected from private dental clinics in Riyadh district. Teeth were stored in screw-top bottles containing 2% thymol solution at room temperature.
A total of sixty extracted mandibular and maxillary premolar teeth were selected for this study, and preoperative digital radiograph in mesiodistal views was made for every tooth to assess its root canal morphology.
Teeth selection was made on the basis of the following inclusion criteria:
- Single root
- With curvature <20°
- No gross coronal caries
- No root caries, resorption, or fracture
- Root with single patent canal
- Absence of root canal fillings.
Preoperative digital radiography using X-ray machine was made for all collected teeth and the radiographs were captured in mesiodistal views [Figure 1].
After selection of the teeth, soft debris on the root surface was removed. Access opening was achieved by sectioning at the cementoenamel junction using handpiece with carborundum discs. The working length of each root was established 1 mm short of this length and it was standardized (15 mm) for all root samples.
Root encasement was prepared for each sample root to facilitate handling of roots during root canal preparation and obturation and during GP removal. Clear plastic spectrophotometer cuvettes (1 cm square) were used to retain the acryl around the roots (the apical 3 mm of root apex should be protruded above the cuvette). The cuvettes were cut into 10 mm length, trimmed, and polished before use. Red wax sheet (2 mm thickness) was used to hold the coronal 2 mm of each root by making a hole in it (the root surface was allowed to protrude to the same level of the wax surface). Another wax sheet was used beneath the first sheet to hold firmly the file handle protruded from the coronal part of the root.
The open-ended cuvettes were then placed over each root, in a way, making sure that the long axis of each canal was parallel to the axis of the cuvettes. A melted red wax was poured around the cuvettes to hold it in place and to prevent acrylic resin leakage. Then, a clear acrylic resin was introduced around the root in layers until the cuvettes were totally filled with resin, taking care to exclude air bubbles and also assuring the apical 3 mm of the root was not covered with acrylic resin. After this, all samples were retained back into the screw-top bottles containing thymol ready to be used in the study.
A holder made from silicone impression material (Elite H-D Zhermack, Rovigo, Italy) was used to facilitate the handling of root/acrylic blocks during root canal preparation [Figure 2].
|Figure 2: (a) Cuvettes surround roots before purring acrylic reason, (b) root/acrylic blocks, (c) silicon model holder|
Click here to view
Root canal preparation
Canals of all groups were prepared using step-back technique with circumferential filing motion (Harty, 1982). The apical stop was prepared first with a series of K-files (sizes 15–35) used in circumferential filing motion around the periphery of the canal wall at the full working length (15 mm).
Cleaning and shaping of root canal was considered completed when the canal walls felt smooth and the master apical file (size 40) could reach the working length without any difficulty; further, the canal space was checked by a finger spreader (Dentsply, Maillefer, Ballaigues, Switzerland) inserted loosely to within 1–3 mm of the working length. Then, all canals were dried using paper point's size 40 (Dentsply, Maillefer, Ballaigues, Switzerland) and obturated with GP and AH26 sealer (Dentsply, DeTrey, Konstanz, Germany) using lateral condensation technique.
A size 40 GP cone (Dentsply, Maillefer, Ballaigues, Switzerland) as master apical cone was used to fill the canal. The canal walls were coated first with sealer using the master apical cone, and then the cone was placed full canal at the working length. A finger spreader (size 25) was used to condense laterally the GP and creating spaces for the fine accessory GP points (Dentsply, Maillefer, Ballaigues, Switzerland) until the spreader can no longer be introduced into the canal more than 4 mm. The excess GP at the canal opening was removed using heated plugger (Dentsply, Maillefer, Ballaigues, Switzerland) and its remnant was vertically condensed.
Finally, all samples were randomly divided into five groups (12 roots each) and each group was numbered and kept in a plastic jar and in the incubator at 37°C in 100% humidity for 2 weeks prior the GP removal.
After a period of 2 weeks, the temporary filling of each group was removed; each root sample (acrylic/root block) was hold by the silicon holder over the cuvettes, and GP was removed (retreated) according to the following technique.
- Group one (Gates-Glidden and Hedstrom Files)
- Group two (ProTaper Universal Retreatment Rotary Files Alone)
- Group three (ProTaper Universal Retreatment Rotary Files with Hedstrom Files)
- Group four (D-Race Retreatment Rotary Files Alone)
- Group five (D-Race Retreatment Rotary Files with Hedstrom Files).
Method of evaluation
Data collected sheet was designed to record sample number, group number, fractured instrument, and deformed instrument.
Furthermore, apical cleanliness was assessed on radiographs by two examiners.
Descriptive statistics including means and standard deviation were calculated for each group, and the result from all tested groups was submitted to one-way analysis of variance and Tukey's post hoc test to demonstrate different between groups' means.
| Results|| |
In the whole study, it was found that four instruments were fractured and 31 instruments were deformed as seen in [Table 1]. Most deformed instruments were Gates-Glidden and Hedstrom files, eight Hedstrom files size 20 and size 25, were deformed. Only one Hedstrom file size 40 was fractured.
When GP removed with proTaper alone, it was found that two D3 files were deformed and one ProTaper size (D3) was fractured. When using six ProTaper with Hedstrom files (three each of size 35 and size 40), Hedstrom files were deformed but no ProTaper files were fractured or deformed.
When the using D-Race with Hedstrom file, only one Hedstrom file size 40 and one D-Race file size (DR1) were fractured.
Interestingly, D-Race alone technique had no fractured or deformed happened.
| Discussion|| |
Therefore, in this study, a step-back preparation technique was used for all samples. In addition, the same type of GP and sealer (AH26) was used in a cold lateral condensation technique. A cold lateral condensation is one of the most widely used techniques for root canal obturation and it is commonly used in many retreatment studies.,,
Samples were incubated for 2 weeks to allow complete set of the sealer to exclude the effect of sitting time on study result. However, most of the retreatment studies had an incubation period ranged from 3 days to 8 months using different types of sealers.,,, Regarding AH26 sealer, Saad et al. used AH26 with an incubation period of 1 week, Hülsmann and Stotz  for 2 months, and de Carvalho Maciel and Zaccaro Scelza  for 3 months. In this study, an incubation period of 2 weeks was used due to the time limit of the research project.
Different techniques have been used for the evaluation of endodontic filling material remnants including traditional radiographs; digital radiograph or traditional radiograph was digitized and analyzed using software or using common way of evaluation of endodontic filling remnants making teeth transparent., More recently, computed tomography (CT) scan and micro-CT were used to assess endodontic filling material removal.,
In this study, digital radiographs were used for all root canal samples in mesiodistal views, and the assessments were then done using image analysis “Onex program,” by calculating the mean length of filling material remnants in coronal, middle, and apical each portion and also by ranking of apical cleanliness.
Instrument fracture and deformation are the important factors of GP removal success during the retreatment procedure., In this study, we found a few instruments fractured which is opposite to the findings of Rödig et al., who reported more incidents of D-Race files fracture. In general, we found that H-files are liable to fracture or deform more than rotary files.
| Conclusion|| |
Under the limitation of this study, it concluded that the combination of D-Race with Hedstrom files was cleaned the apical canal completely, and, in general, it was the best efficient cleaning technique. Comparing Hedstrom file, ProTaper file, D-Race file, and Hedstrom file is more likely to fracture and deform care need to be taken when using Hedstrom files in the removal of GP, it is liable to fracture and deformity.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Joseph M, Ahlawat J, Malhotra A, Rao M, Sharma A, Talwar S.In vitro
evaluation of efficacy of different rotary instrument systems for gutta percha removal during root canal retreatment. J Clin Exp Dent 2016;8:e355-60.
Nair PN, Sjögren U, Krey G, Kahnberg KE, Sundqvist G. Intraradicular bacteria and fungi in root-filled, asymptomatic human teeth with therapy-resistant periapical lesions: A long-term light and electron microscopic follow-up study. J Endod 1990;16:580-8.
Somma F, Cammarota G, Plotino G, Grande NM, Pameijer CH. The effectiveness of manual and mechanical instrumentation for the retreatment of three different root canal filling materials. J Endod 2008;34:466-9.
Fouda MY. Significance of the use of two rotary systems and hand file in endodontic retreatment. Cairo Dent J 2008;24:511-20.
Jayasenthil A, Sathish ES, Prakash P. Evaluation of manual and two-rotary NiTi retreatment systems in removing gutta-percha obturated with two root canal sealers. ISRN Dent 2012;2012:208241.
Saad AY, Al-Hadlaq SM, Al-Katheeri NH. Efficacy of two rotary NiTi instruments in the removal of gutta-percha during root canal retreatment. J Endod 2007;33:38-41.
Wilcox LR, Krell KV, Madison S, Rittman B. Endodontic retreatment: Evaluation of gutta-percha and sealer removal and canal reinstrumentation. J Endod 1987;13:453-7.
Bergenholtz G, Lekholm U, Milthon R, Heden G, Odesjö B, Engström B. Retreatment of endodontic fillings. Scand J Dent Res 1979;87:217-24.
Siqueira JF Jr. Aetiology of root canal treatment failure: Why well-treated teeth can fail. Int Endod J 2001;34:1-10.
Hülsmann M, Stotz S. Efficacy, cleaning ability and safety of different devices for gutta-percha removal in root canal retreatment. Int Endod J 1997;30:227-33.
Imura N, Kato AS, Hata GI, Uemura M, Toda T, Weine F. A comparison of the relative efficacies of four hand and rotary instrumentation techniques during endodontic retreatment. Int Endod J 2000;33:361-6.
Sae-Lim V, Rajamanickam I, Lim BK, Lee HL. Effectiveness of ProFile. 04 taper rotary instruments in endodontic retreatment. J Endod 2000;26:100-4.
Lee SW, Tan ST, Che ZA, Aziz ZA. Is profile alone sufficient to remove gutta-percha during endodontic retreatment? Ann Dent 2005;12:1-8.
Masiero AV, Barletta FB. Effectiveness of different techniques for removing gutta-percha during retreatment. Int Endod J 2005;38:2-7.
Gergi R, Sabbagh C. Effectiveness of two nickel-titanium rotary instruments and a hand file for removing gutta-percha in severely curved root canals during retreatment: An ex vivo
study. Int Endod J 2007;40:532-7.
de Carvalho Maciel AC, Zaccaro Scelza MF. Efficacy of automated versus hand instrumentation during root canal retreatment: An ex vivo
study. Int Endod J 2006;39:779-84.
Barletta FB, Rahde Nde M, Limongi O, Moura AA, Zanesco C, Mazocatto G.In vitro
comparative analysis of 2 mechanical techniques for removing gutta-percha during retreatment. J Can Dent Assoc 2007;73:65.
Hammad M, Qualtrough A, Silikas N. Three-dimensional evaluation of effectiveness of hand and rotary instrumentation for retreatment of canals filled with different materials. J Endod 2008;34:1370-3.
Ferreira JJ, Rhodes JS, Ford TR. The efficacy of gutta-percha removal using ProFiles. Int Endod J 2001;34:267-74.
Rödig T, Hausdörfer T, Konietschke F, Dullin C, Hahn W, Hülsmann M. Efficacy of D-RaCe and ProTaper Universal Retreatment NiTi instruments and hand files in removing gutta-percha from curved root canals – A micro-computed tomography study. Int Endod J 2012;45:580-9.
[Figure 1], [Figure 2]